WELCOME TO DETAILIEN.COM


DETAILIEN IS NOW ON LAZADA!
CLICK BELOW TO ENTER OUT LAZADA STORE:

LIKE OUR FACEBOOK PAGE FOR THE LATEST UPDATES FROM DETAILIEN:




OPTIMUM COATINGS

For Coating Services please check out our page COATING SERVICE.



COATINGS: OPTIMUM OPTI-COAT PRO+
Opti-Coat Pro Plus delivers More Gloss & Greater Protection!
The Opti-Coat Pro Plus Ceramic Paint Protection package now delivers even more gloss and slickness than ever before, while still maintaining the same chemical structure that has made it renowned as the ultimate protective paint coating.

The advanced formulation not only delivers amazing gloss and protection, it also provides increased anti water spotting and hydrophobic properties to maintain the perfect finish in the long term.

Opti-Coat Pro Plus is an enhanced 2 step version of Opti-Coat Pro. The first step, Opti-Coat Pro, is a ceramic clear coating with superior resistance to scratching, chemical etching, fading due to UV and provides outstanding release properties. Opti-Coat Pro Plus adds great gloss and slickness for a fantastic shine and long term paint protection with a 7 year warranty.

Available Sizes:
10cc Opti-Coat PRO + 5cc Opti-Coat PRO+



COATINGS: OPTIMUM OPTI-COAT PRO
Opti-Coat is a hard wearing, ceramic clear coat for superior resistance to scratching (9H) and protection from chemical etching due to environmental impacts.

The Opti-Coat pre-polymer cross links, and forms a continuous protective film on the painted surface it is applied to, similar to a single component isocyanate that forms a clear coat finish.

Opti-Coat has better chemical resistance, scratch & mar resistance, and release properties than any automotive paint coating in use. It provides permanent protection for all modern factory paints and can also be used to protect metal and hard plastic surfaces.

Available Sizes:
10cc Opti-Coat PRO



COATINGS: OPTIMUM PAINT GUARD
Optimum Opti-Mitt is made of high density polyurethane foam that is very soft, highly absorbent, and very durable. It is specifically designed to work with Optimum No Rinse orOptimum Car Wash to make the process of washing cars safer and easier. The waffle design creates a much larger surface area for removing all the dirt and grime from the surface safely and effectively. 
Optimum Opti-Mitt provides a great wash medium for Optimum No Rinse or Optimum Car Wash. The 85-90 pores per square inch allows for the wash solution to flow to the surface and add great lubricity during the wash to protect all automotive surfaces from marring. Opti-Mitt is also very absorbent and can pull all the dirt and grime safely and effectively. The yellow backing of Opti-Mitt is much coarser and is designed to be used as a bug sponge or cleaning wheels. So in essence, you will get two wash mitts in one with Optimum Opti-Mitt.

Available Sizes:
1 piece



COATINGS: OPTIMUM GLOSS COAT
Optimum Gloss-Coat is the most advanced polymer system that forms a layer of clear coat over the automotive finishes. Optimum Gloss-Coat provides better scratch and mar resistance, better UV resistance, better chemical etch resistance, and has better release properties than any other consumer product while providing unsurpassed gloss and slickness. Additionally, you can top Optimum Gloss-Coat with any non-abrasive wax or sealant of your choice to add additional gloss and slickenss.

Optimum Gloss-Coat can be used to protect the following surfaces:

• Painted Surfaces
• wheels 
• plastic trim
• bumpers 
• aluminum & chrome surfaces.

Since Optimum Gloss-Coat bonds to surfaces it is applied to, any paint imperfections must be removed with Optimum Polish II or Optimum Hyper Polish before application. Also all waxes and oils must be removed from the surfaces for proper bonding.

Directions:

1. Polish paint with Optimum Polish II or Optimum Hyper Polish to remove any defects. 
2. Clean surface with 15% IPA solution to remove all polishing oils, waxes, and silicones.
3. Prime the applicator by making an X pattern across the pad. Only a few drops will be needed for each subsequent panel.
4. Wipe Optimum Gloss-Coat onto a single panel at a time in a thin layer using two directions, in a circular or front to back direction. 
5. Within 5 minutes, inspect the panel with adequate lighting looking for any thick areas that have not flashed away to clear. 
6. Use foam applicator or paint safe microfiber to even out any areas where you see streaks. This step is key, as any spots not leveled will have to be polished if allowed to cure. Panels will feel a bit tacky and will be self-leveling during cure time, so avoid any unnecessary touching, wiping, or contact to produce the best results.
7. Repeat steps 1-6 for each panel where application is desired.


Not recommended for glass.

Available Sizes:
20 cc


COATINGS: OPTIMUM OPTI-LENS COATING
Optimum Opti-Lens Coating is the most advanced polymer system that is specifically designed for the protection of headlight lenses. This hybrid resin is a combination of Opti-Coat 2.0 ceramic resin and an acrylic resin for maximum bonding and protection of acrylic and polycarbonate lenses. Additionally Optimum Opti-Lens Coating contains high levels of UV absorbers to minimize discoloration and fading of automotive headlight lenses.

Optimum Opti-Lens is highly concentrated and one tube is enough to cover 5-6 sets of headlights. Once applied, Optimum Opti-lens will form a permanent bond to the surface and can only be removed by polishing or paint removers.

Directions:

1. Clean headlights with 15% IPA solution to remove any oils, waxes, or sealants.
2. Remove all the oxidation by sanding and then polishing the headlights with Optimum Polish II or Optimum Hyper polish. 
3. Wipe down the entire lens with a clean damp microfiber towel to remove any polishing residue. 
4. Prime the applicator pad by making an X pattern across the pad. Only a few drops will be needed per headlight lens.
5. Wipe Optimum Opti-Lens Coating on the headlight lens in a circular or back and forth direction. 
6. Within 5 minutes, inspect the headlight with adequate lighting looking for any thick areas that have not flashed away to clear. 
7. Use the foam applicator or an Optimum Multi-Surface Microfiber Towel to wipe down and remove any excess.

Available Sizes:
30cc



COATINGS: OPTI-GLASS COATING PRO
Optimum Opti-Glass Coating is designed to chemically bond to silica based surfaces such as automotive glass and provide long term water repellency and improve resistance against scratching and rock chips for up to one year. Use the Optimum Glass Clean & Protect for subsequent cleaning to increase the longevity of Optimum Opti-Glass Coating indefinitely.

Optimum Opti-Glass Coating is highly concentrated and one bottle is enough to cover 20-30 windshields. The improved visibility and the increased chip resistance that Optimum Opti-Glass Coating provides will make driving safer and more enjoyable. Additionally Optimum Opti-Glass Coating will prevent ice or snow from bonding to the glass surfaces.

For best results before applying Optimum Opti-Glass Coating make sure the surface of glass is clean and free of any contaminants. 

Directions:

Apply when the temperature is between 60°-90° F (15°-30°C). Do not apply in direct sunlight.

1. Polish glass as needed with Optimum Polish II or Opti-Eraser to remove any bonded contaminants. 
2. Wipe down the surface with 15% Isopropanol (Rubbing Alcohol) solution to remove any oils or sealers.
3. Apply an even amount of Optimum Opti-Glass Coating to an applicator pad.
4. Wipe Optimum Opti-Glass Coating onto one half of the windshield at a time in a circular manner. 
5. Allow Optimum Opti-Glass Coating to dry for 2 minutes and then wipe off the excess. If you do not remove the excess coating, it will harden and will require polishing to remove it. 

Available Sizes:
30cc


COATINGS: OPTI-GLASS CLEAN & PROTECT
Optimum Opti-Glass Clean & Protect Concentrate is a hyper-concentrated glass cleaner that contains a combination of mild cleaners and an advanced polymer that bonds to glass and other silica based surfaces to add water repellency by lowering the surface tension and protect glass by increasing the coefficient of slip. Optimum Opti-Glass Clean & Protect Concentrate can be used as a stand-alone glass sealant or as a booster to Optimum Opti-Glass Coating.

is designed to chemically bond to silica based surfaces such as automotive glass and provide long term water repellency and improve resistance against scratching and rock chips for up to one year. Use the Optimum Opti-Glass Clean & Protect for subsequent cleaning to increase the longevity of Optimum Opti-Glass Coating indefinitely.

Optimum Opti-Glass Clean & Protect is highly concentrated and the 2 oz. bottle should be diluted with water to make one gallon of ready to use product. Once diluted, the regular use will ensure improved visibility and increased chip resistance to make driving safer and more enjoyable. Additionally Optimum Opti-Glass Clean & Protect will prevent ice or snow from bonding to the glass surfaces.

Directions:

1.DiluteOptimum Opti-Glass Clean & Protect with distilled water to make one gallon of ready to use product. 
2. Spray liberally on glass surfaces and wipe down with Optimum Glass Toweltill glass surface is completely clean.

Available Sizes:
60cc



PROTECT: OPTIGUARD FABRIC
What Is Opti-Guard?
Opti-Guard is a series of coatings to provide superior protection and durability for all interior surfaces including leather, vinyl, and fabric materials.

Opti-Guard

Opti-Guard Leather & Vinyl
Opti-Guard Leather creates a hydrophobic coating to protect coated leather and vinyl surfaces from premature aging, cracking and other damage such as color transfer and staining.  Opti-Guard Leather is manufactured using a hybrid ceramic and acrylic resins that allows a strong, flexible coating for these softer surfaces with complete protection from UV damage. Opti-Guard Leather is resistant to chemicals providing multi-year protection which is unheard of for leather coatings. It contains special matting agents to maintain the original factory appearance of the surfaces it is applied to.  Apply Opti-Guard Leather to leather seats, vinyl dashboards, leather and vinyl trim pieces for complete protection inside and out. Opti-Guard Leather should not be used on Tanned Leather surfaces.

Opti-Guard Fabric
Opti-Guard Fabric creates a superhydrophobic coating to protect fabric seats, carpets, fabric convertible tops and other textile surfaces. When liquids come in contact with Opti-Guard Fabric, the surface repels the substance and liquids roll off without penetrating or staining the material.

Opti-Guard Fabric forms a strong bond with the fibers to prevent removal during cleaning. When combined with Optimum Fabric Cleaner & Protectant, the Opti-Guard system provides permanent protection for these surfaces.

Available Sizes:
Opti-Guard Leather 30cc
Opti-Guard Fabric 8 oz.


COATINGS: OPTI-TRIM RESTORE & PROTECT
Opti-Trim


Protect New, or Restore Old & Faded Plastic!

Opti-Trim is a revolutionary two part system, to permanently solve the ongoing issue of faded plastic trim. Unlike other coatings that are limited in their lifespan and ability to prevent oxidation, Opti-Trim contains high levels of UV absorbers to help prevent future fading and provide a long term solution.

Opti-Trim Protect is a clear, hybrid resin coating to help prevent new plastic trim from future fading due to UV exposure. For new cars, choose Opti-Trim Protect to enhance or maintain the factory appearance of your plastic trim.

Opti-Trim Restore is a durable, hybrid resin coating containing special dye additives to restore faded and oxidised trim back to a like new, factory appearance. For older vehicles suffering from damaged trim due to UV exposure, choose Opti-Trim Restore to restore your plastic trim back to its former glory.


How Does it Work?

Opti-Trim Restore is absorbed by the plastic surface, giving back the life and colour taken away from long term exposure to UV rays. The Opti-Trim resin at the same time reacts with the plastic, to produce a chemical bond between itself and the substrate. Once cured, the resin is now bonded throughout the surface of the plastic trim to produce a new, durable surface that is highly resistant to UV exposure to maintain the new look.

Available Sizes:
Opti-Trim Restore 30cc
Opti-Trim Protect 30cc



PRICE LIST- OPTIMUM COATINGS

CODE DESCRIPTION SIZE SRP Sale Price
OPRO Optimum OptiCoat PRO 30 cc $585  
OPG Optimum Paint Guard 30 cc $540  
OGC Optimum Gloss Coat 20 cc $300  
OOL Optimum OptiLens 30 cc $360  
OOGC Optimum OptiGlass Coating PRO 30 cc $180  
OGCP OptiGlass Clean & Protect (Conc.) 60 cc $150  
OGF OptiGuard Fabric 8 oz $150  
OOTR Optimum OptiTrim Restore 30 cc $360  
OOTP Optimum OptiTrim Protect 30 cc $360  
OCP OptiCoat Primer 30 cc $0  



FOR PRICING OR MORE INFORMATION:

+6016 660 3217

Or email us:
info.detailien@gmail.com

No comments:

Post a Comment